extend Your senses
sitemap
cz en
A selected group of goods  Products »

TG 68
diameter 6 mm, -50 to 200 °C

Description and application

TG 68
diameter 6 mm, -50 to 200 °C

These resistance sensors are designed to measure the temperature of gaseous and liquid substances. The maximum temperature range of use of the sensors is -50 °C to 200 °C for the model with a silicone cable and -40 °C to 105 °C for the model with a PVC cable. The supply cable is a type with silicone insulation and shielding. The diameter of the case also enables the encasement of special temperature sensors – KTY, SMT 160, DS 18B20, TSic etc. In combination with a thermowell, the sensors meet the ingress protection of IP 68 (h = 5 m) in accordance with EN 60 529 and are designed for measuring the temperature below the surface of water for continuous immersion at a depth of up to 5 m.

The method of use must be chosen with regard to the temperature and chemical resistance of the case and supply cable.

ACCESSORIES

DECLARATION, CERTIFICATION, CALIBRATION

  • EC Declaration of Conformity – in accordance with Act 22/1997 Coll. on technical requirements on products as amended.
  • Calibration – The final metrological inspection – comparison with standards or working instruments – is carried out for all the products. Continuity of the standards and working measuring instruments is ensured within the meaning of the Section 5 of Act no.505/1990 on metrology. The manufacturer offers a possibility to supply the sensors calibrated in SENSIT s.r.o.’s laboratory (according to requirements of the EN ISO/IEC 17025 standard) or in an Accredited laboratory.  

 


  • Specifications
  • Wiring diagram
  • Dimensional draft
  • Download

Sensor type TG 68
Maximum temperature range of use -40 to 105 °C PVC cable,
-50 to 200 °C silicone cable
Type of sensing element all types
Ingress protection IP 68 (depth = 5 m) in accordance with EN 60 529
Case material stainless steel DIN 1.4301
Diameter of case 6 mm
Length of case L 60 mm
Supply cable shielded silicone 2 x 0.34 mm2 or 4 x 0.22 mm2
unshielded PVC 2 x 0.35 mm2 or 4 x 0.35 mm2
Wire resistance 0.11 Ω for 1 m of cable for 2-wire connection
Response time τ0.5 = 12 s, τ0.9= 35 s in flowing water at 0.4 m.s-1

Note: Manufacturer reserves the right to make changes in design and technical characteristics of the products. For actual information, please always contact your dealer.

Datasheet - CABLE TEMPERATURE SENSOR TG 68
Datasheet - CABLE TEMPERATURE SENSOR TG 68Datasheet - CABLE TEMPERATURE SENSOR TG 68
Schéma zapojení
Rozměrový náčrt

Back to category