extend Your senses
sitemap
cz en
A selected group of goods  Products »

Jacketed thermocouple
diameter 4.5 mm

Description and application

Jacketed thermocouple
diameter 4.5 mm

Thermocouple temperature sensors with attached guidance are designed for measuring temperature of gaseous, liquid or solid substances. Temperature range is up to 1 100 °C depending to the thermocouple type and to the production technology used. The thermocouple temperature sensors are possible to be used for any control systems compatible with selected thermocouple type. The thermocouple temperature sensors meet ingress protection IP 67 according to the EN 60 529 depending to the thermocouple type and to the production technology used.

The thermocouple temperature sensors are intended for operation in chemically non-aggressive environment.  

ACCESSORIES

  • connectors
  • screw with collet or cutting rings – if different lengths of stem immersion of the temperature sensor are set  

DECLARATION, CERTIFICATION, CALIBRATION

  • EC Declaration of Conformity – in accordance with Act 22/1997 Coll. on technical requirements on products as amended.
  • Calibration – The final metrological inspection – comparison with standards or working instruments – is carried out for all the products. Continuity of the standards and working measuring instruments is ensured within the meaning of the Section 5 of Act no.505/1990 on metrology. The manufacturer offers a possibility to supply the sensors calibrated in SENSIT s.r.o.’s laboratory (according to requirements of the EN ISO/IEC 17025 standard) or in an Accredited laboratory.  

 


  • Specifications
  • Wiring diagram
  • Dimensional draft
  • Download
Sensor type TC 094.5P TC 094.5T
Thermocouple type "J" and "K" (other on request), single and double
Ingress protection IP 55, 54 a 50 according to EN 60 529 IP 67, 64 a 50 according to EN 60 529
Design with an isolated measuring point or with a measuring point connected to the jacket with stainless steel case and internal thermocouples leading
Diameter of the jacket / diameter of the case 4,5 mm
Length of the measuring part
from 20 to 300 mm as standard, others as requested
Measuring range - on measuring point "K" type up to 1 100 °C
"J" type up to 700 °C
other depending on the type
from 200 to 600 °C
Accuracy class standard 2 according to the EN 60584 and DIN 43 710, further 1
Jacket material / case material
Inconel 2.4816 for TC "K", stainless steel DIN 1.4541 for TC "J" stainless steel DIN 1.4571 and DIN 1.4301
Sensor body flexible, moldable fix and non-moldable
Compensated lines Silicone unshielded 2 × 0.22 mm2 up to 200 °C IP 55 / IP 67
PTFE shielded 2 × 0.22 mm2 up to 260 °C (short time 300 °C) IP 54 / IP 64
Glass + metal braiding 2 × 0.22 mm2 up to 400 or 600 °C IP 50

Note: Manufacturer reserves the right to make changes in design and technical characteristics of the products. For actual information, please always contact your dealer.

Test report - EN 61 373
Test report - EN 61 373Test report - EN 61 373
Test report - EN 50 155
Test report - EN 50 155Test report - EN 50 155
Schéma zapojení
Rozměrový náčrt

Back to category