extend Your senses
sitemap
cz en
A selected group of goods  Products »

TR 141 and TR 141B
dural or stainless steel, 0 to 350 °C

Description and application

TR 141 and TR 141B
dural or stainless steel, 0 to 350 °C

These resistance sensors are designed for measuring the surface temperature of solid substances with a flat and smooth surface. The maximum temperature range of use is 0 °C to 350 °C, 400 °C short-term. Given the type of supply cable used with glass fibre insulation and metal braiding, the sensors are not resistant against the penetration of moisture into the case and are designed for use in a dry environment. The sensors are designed for use in a chemically non-aggressive environment.

The method of use must be chosen with regard to the temperature and chemical resistance of the case and supply cable..

ACCESSORIES

DECLARATION, CERTIFICATION, CALIBRATION

  • EC Declaration of Conformity – in accordance with Act 22/1997 Coll. on technical requirements on products as amended.
  • Calibration – The final metrological inspection – comparison with standards or working instruments – is carried out for all the products. Continuity of the standards and working measuring instruments is ensured within the meaning of the Section 5 of Act no.505/1990 on metrology. The manufacturer offers a possibility to supply the sensors calibrated in SENSIT s.r.o.’s laboratory (according to requirements of the EN ISO/IEC 17025 standard) or in an Accredited laboratory.  

  • Specifications
  • Wiring diagram
  • Dimensional draft
  • Download

Sensor type TR 141
TR 141B
Maximum temperature
range of use
0 to 350 °C
Type of sensing element Pt 100, Pt 500, Pt 1000, Thermocouple K, J
Ingress protection IP 50 in accordance with EN 60 529
Case material
aluminium alloy stainless steel DIN 1.4301
Length of case L
40 mm
End sleeves
H 0.25 / 10 mm
Supply cable With glass fibre and metal
braiding 2 x 0.35 mm2
With glass fibre and metal
braiding 4 x 0.35 mm2
Silicone shielded
2 x 0.22 mm2
Wire resistance
0.11 Ω for 1 m of cable
for 2-wire connection
0.16 Ω for 1 m of cable
for 2-wire connection

Recommendation

1 kg
Use thermal conductive paste for installation

Note: Manufacturer reserves the right to make changes in design and technical characteristics of the products. For actual information, please always contact your dealer.

Datasheet - TEMPERATURE SENSORS TR 141 AND TR 1
Datasheet - TEMPERATURE SENSORS TR 141 AND TR 1Datasheet - TEMPERATURE SENSORS TR 141 AND TR 1
Schéma zapojení
Rozměrový náčrt

Back to category