extend Your senses
cz en
A selected group of goods  Products »

Thermocouple temperature sensors
with connector TC03F a TC03M

Description and application

Thermocouple temperature sensors
with connector TC03F a TC03M

These thermocouple temperature sensors with a connector MINI TC02F and TC02M are designed for temperature measurements of gaseous or liquid substances. Temperature range is up to 1 100 °C depending to the thermocouple type and to the production technology used. The temperature sensors with a connector consist of a thermocouple and connector, which is an integral part of the case. The temperature sensors with a connector meet ingress protection IP 50 according to EN 60 529 and they are designed for temperature measurement in pipelines.

The thermocouple temperature sensors with a connector are intended to be used in operation in chemically non-aggressive environment.


  • connectors
  • screw with collet or cutting rings – if different lengths of stem immersion of the temperature sensor are set  


  • EC Declaration of Conformity – in accordance with Act 22/1997 Coll. on technical requirements on products as amended.
  • Calibration – The final metrological inspection – comparison with standards or working instruments – is carried out for all the products. Continuity of the standards and working measuring instruments is ensured within the meaning of the Section 5 of Act no.505/1990 on metrology. The manufacturer offers a possibility to supply the sensors calibrated in SENSIT s.r.o.’s laboratory (according to requirements of the EN ISO/IEC 17025 standard) or in an Accredited laboratory.  


  • Specifications
  • Dimensional draft
Sensor type TC03F TC03M
Thermocouple type "J" and "K" (other on request), single and double
Ingress protection IP 50 podle ČSN EN 60 529
Design with an isolated measuring point or with a measuring point connected to the jacket
Diameter of the jacket D 1,5; 2; 3; 4,5 and 6 mm
Length of the measuring part L
from 20 to 300 mm as standard, others as requested
Measuring range - on measuring point "K" type up to 1 100 °C
"J" type up to 700 °C
other depending on the type
Accuracy class standard 2 according to the EN 60584 and DIN 43 710, further 1
Jacket material Inconel 2.4816 for TC "K", stainless steel DIN 1.4541 for TC "J"
Sensor body flexible, moldable
Type of connector female male
Temperature around connector -30 °C to 220 °C

Note: Manufacturer reserves the right to make changes in design and technical characteristics of the products. For actual information, please always contact your dealer.

Schéma zapojení
Rozměrový náčrt

Back to category