extend Your senses
cz en
A selected group of goods  Products »

TG 12
diameter 2 mm, -50 to 200 °C

Description and application

TG 12
diameter 2 mm, -50 to 200 °C

These resistance temperature sensors are designed for contact measurement of the temperature of gaseous and liquid or solid substances. The maximum temperature range is -50 to 200 °C. The 2 mm diameter of the case ensures fast response to changes in temperature. The type of lead-in cable used has Teflon insulation without shielding. The sensors are designed for universal use. The method of use must be chosen with regard to the temperature and chemical resistance of the case and lead-in cable.

The sensors are also designed for use in a chemically nonaggressive environment.



  • EC Declaration of Conformity – in accordance with Act 22/1997 Coll. on technical requirements on products as amended.
  • Calibration – The final metrological inspection – comparison with standards or working instruments – is carried out for all the products. Continuity of the standards and working measuring instruments is ensured within the meaning of the Section 5 of Act no.505/1990 on metrology. The manufacturer offers a possibility to supply the sensors calibrated in SENSIT s.r.o.’s laboratory (according to requirements of the EN ISO/IEC 17025 standard) or in an Accredited laboratory.  


  • Specifications
  • Wiring diagram
  • Dimensional draft
Sensor type
TG 12
Maximum temperature range -50 to 200 °C
Type of sensing element Pt 100, Pt 500, Pt 1000
Ingress protection IP 67 in according with EN 60 529
Case material stainless steel DIN 1.4301
Diameter of case 2 mm
Length of case L 25 to 60 mm
Lead-in cable teflon unshielded 4 x 0,02 mm2 (4 x AWG 34)
Wire resistance 0,765 Ω / m (resistance of 1 m wire)
Response time τ0,5 = 1,5 s; τ0,9 = 4,5 s

Note: Manufacturer reserves the right to make changes in design and technical characteristics of the products. For actual information, please always contact your dealer.

Schéma zapojení
Rozměrový náčrt

Back to category